News -

News (Page 9)

Structural principle of single tube sprayer
05-12-2019
There is a water inlet valve on the suction seat at the bottom of the single tube sprayer of the hand-held sprayer manufacturer, and a water outlet valve on the outer wall of the single tube in the air chamber. Th...
Care and use of handheld sprayers
14-12-2019
The hand-held sprayer is one of the products produced by the hand-held sprayer manufacturers. It has multiple functions and must be maintained even during use, which will be more useful in its use. Hand-held spray...
Application of handheld sprayer
20-12-2019
First install the sprayer in accordance with the instruction manual to keep it in good condition. Leaks are not allowed in the gas report, and every part of the connection will not leak or leak. Test spraying must...
Sprayer maintenance and common faults
27-12-2019
In addition to using and maintaining backpack sprayers in strict accordance with the requirements of the product manual, the handheld sprayer manufacturers should also pay attention to the following points during ...
Impeller knowledge in sprayers
03-01-2020
The impeller is one of the important parts in the sprayer, which directly affects the spray quality. The impeller is composed of a front impeller and a rear impeller, and the front impeller and the rear impeller a...