There are many types of nozzles used by watering can ma […]
There are many types of nozzles used by watering can manufacturers to meet a variety of environmental uses. After using for a period of time, problems may occur, so what are the common types of nozzle failure handling?
The water tongue is abnormally rotating, and the water tongue is scattered as soon as it leaves the nozzle. The main reason is that the internal damage of the nozzle is serious. The reason for the insufficient range is that the working pressure is not enough, and the pressure can be increased as required. The rocker-type nozzle does not rotate normally. It may be that the deflector cuts into the water tongue too deeply, the frequency is unstable, and it is suddenly and slowly. The main reason for the abnormal rotation of the worm-gear nozzle is that the coupling screw between the impeller shaft and the small worm wheel is loose or the pin is detached. The leaking part of the rotating part of the nozzle should be removed and the hollow shaft should be removed for cleaning.
Of course, we should also pay attention to the use of the drug, it is necessary to clean after use. If it is clear water, it should be dried and stored, and be careful not to expose it directly in the sun.